From the free quote to the final rinse, fleet washing in Junction, TX follows a simple process: inspect, protect, clean, rinse and check.
How we clean it
When to book fleet washing
- Dirty company vehicles representing your brand
- Road salt build-up in winter
- Equipment caked with mud
What causes the dirt and stains
- Road grime and salt
- Job-site mud
- Exhaust soot
Easy upkeep between cleanings
- Rinse salt off undercarriages often in winter
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Wash water runoff at your yard
- Damage to decals and seals
Our process for fleet washing
- Schedule at your location
- Pre-treat
- Wash and rinse
- Detail wheels and trim
- Log the vehicles washed
How much does fleet washing cost?
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Fleet Washing in Junction, TX
In Texas, commercial buildings and sidewalks often need cleaning several times a year, because mildew, gum and grime build up quickly in the heat.
Parts of Texas are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.
Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.
Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
We provide fleet washing across Junction (ZIP code 76849) and nearby towns including Mason (36.8 mi), Kerrville (48.5 mi), Eden (50.4 mi) and Brady (51.6 mi). Call (555) 010-0000 for a free quote in Junction.
Fleet Washing: frequently asked questions
How much does fleet washing cost in Junction, TX?
Fleet Washing typically costs $150-$800 per visit for a small fleet, and usually takes Depends on fleet size. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for fleet washing?
Fleet Washing is usually done with mobile wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.
Is fleet washing safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule fleet washing?
Weekly to monthly. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.