Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Junction, TX

Pool Deck Cleaning for Travertine in Junction, TX

Low-pressure wash for travertine. Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone. Typical cost $200-$500.

When we handle pool deck cleaning for travertine in Junction, TX, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. On travertine, the method we use is low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Usually under 1,500 PSI with a wide tipPressure

Cleaning solution: A pH-neutral stone cleaner.

Caring for travertine

Travertine is a natural limestone popular around pools. It is porous and soft, so it stains easily and is damaged by acidic cleaners. Gentle cleaning and a breathable sealer keep it looking good.

Avoid: Acidic cleaners (including vinegar) and high pressure, which pit the stone and open its pores.

How often: Clean yearly; reseal every 2-3 years.

Signs you need pool deck cleaning for travertine

  • Slippery spots near the water
  • Black or green growth at the edges and in joints
  • Rust or leaf stains
  • Faded or dirty coating
  • Hard-water and chlorine residue

What causes the dirt and stains

  • Constant splashing and standing water
  • Sunscreen, body oils and pool chemicals
  • Leaves and pool toys left on the deck
  • Hard water drying on the surface

Easy upkeep between cleanings

  • Hose off the deck after heavy pool use
  • Remove leaves and toys before they stain
  • Keep chlorine and acid containers off the deck surface
  • Ask us before using any cleaner on a coated or stone deck

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Peeling or etching a coated 'cool deck' surface with high pressure
  • Chemicals and wash water getting into the pool
  • Pitting travertine with acid cleaners
  • Slips on wet, treated surfaces

Our process for pool deck cleaning for travertine

  1. Check the deck material and coating
  2. Protect the pool and nearby plants
  3. Pre-treat algae and stains with pool-safe methods
  4. Clean with pressure suited to the surface
  5. Rinse thoroughly away from the water

Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.

Typical pool deck cleaning for travertine prices

$200-$500Typical range for a typical residential pool deck
1-3 hoursTypical time on site
Once or twice a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for travertine

Serving Junction, TX and nearby towns

Shaded driveways, walkways and pool decks in Texas grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Besides Junction (ZIP code 76849), we handle pool deck cleaning for travertine in Mason (36.8 mi), Kerrville (48.5 mi), Eden (50.4 mi) and Brady (51.6 mi). Call (555) 010-0000 for a free quote in Junction.

Pool Deck Cleaning for Travertine: frequently asked questions

How much does pool deck cleaning for travertine cost in Junction, TX?

Pool Deck Cleaning for Travertine typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pool deck cleaning for travertine?

For travertine: usually under 1,500 PSI with a wide tip. What we avoid: acidic cleaners (including vinegar) and high pressure, which pit the stone and open its pores. The cleaning solution does most of the work, followed by a gentle rinse.

Is pool deck cleaning for travertine safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pool deck cleaning for travertine?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Junction, TX

Soft Washing for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $300-$800

Commercial Pressure Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $400-$2,000

Oil Stain Removal

Lifting oil, grease and fluid stains from driveways, garage floors and parking areas.

Typical $100-$300

Storefront Cleaning

Storefront and entrance cleaning: sidewalks, walls, signs and windows, usually before or after business hours.

Typical $150-$500

Rust Stain Removal for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $150-$500

House Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$700

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Driveway Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Rust Stain Removal

Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry.

Typical $150-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Junction, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote